因為軸向柱塞式液壓馬達具有很多以上的優點，所以被廣泛地使用。缺點是這樣的液壓馬達即使在低速時輸出功率還較小，用于直接帶動負載進行低速運轉的機器，例如起重運輸機械、車輛行走機構等。在啟動和低速運轉時，扭矩、功率常常不能滿足運行要求。因此，經常配備各種類型的減速裝置，從而帶來機器體積大的缺點。近年來，低速、大轉矩的液壓馬達得到了較大的發展，出現了很多新的結構。此外，力士樂液壓馬達可以基于每旋轉一圈的中間柱塞副的操作數來分類為單作用類型或多作用類型。根據柱塞布置形式的不同，每種類型可分為徑向式柱塞布置和軸向式柱塞布置。徑向馬達根據其結構特征和柱塞副的受力方式的不同，可以分為不同類型。

Because the axial piston hydraulic motor has many advantages above, it is widely used. The disadvantage is that the output power of such a hydraulic motor is still small even at low speed. It is used to directly drive the load to run at low speed, such as lifting and transportation machinery, vehicle traveling mechanism, etc. When starting and running at low speed, the torque and power often cannot meet the operating requirements. Therefore, it is often equipped with various types of reduction devices, which brings the disadvantage of large size of the machine. In recent years, hydraulic motors with low speed and high torque have been greatly developed, and many new structures have appeared. In addition, Rexroth hydraulic motors can be classified into single acting or multi acting types based on the number of operations of the intermediate plunger pair per revolution. According to the different arrangement forms of the plunger, each type can be divided into radial plunger arrangement and axial plunger arrangement. Radial motors can be divided into different types according to their structural characteristics and the force bearing mode of the plunger pair.